BMW S58 Charge Cooler Manifold (G8x)
CNC charge-cooler manifold for G8x M2 / M3 / M4, with heat shielding and manifold-injection prep.
Charge-air coolers, heat exchangers and intake manifolds that keep IATs flat, pull after pull.
CNC charge-cooler manifold for G8x M2 / M3 / M4, with heat shielding and manifold-injection prep.
Uprated radiator and intercooler set, track-tested to hold intake temps down under sustained load.
Uprated radiator and intercooler set, track-tested to hold intake temps down under sustained load.
Uprated intercooler for the 3.0 T EA839, tested under sustained high-boost driving.
Intercooler for MQB EA888 cars: Audi S3, Golf R, Golf GTI and other VW 2.0 T.
CNC charge-cooler manifold for B58 / B58TU with manifold-injection and port-injection prep.
Max charge-cooler manifold for B48 / B48TU with optional PI rail and heat-shield gaskets.
S55 uprated charge cooler with CNC aluminium housing, available in black or red
Intercooler more than 50% larger than stock in the middle section, cutting intake temps by 10 °C+.
More heat-exchange area and a larger air path for the 2.0 T M274.
Intercooler and turbo pipe kit for M276 3.0 T: C43, S400, GLE320/400.
Charge cooler with 70 mm enlarged inlet/outlet for higher flow and lower intake temps.
Uprated aluminium core with CNC end tanks and pre-drilled water/methanol ports. Direct factory replacement.
Evo-MAX series: twin-core design, core 215 → 275 mm and 80 → 100 mm thick, forged-carbon air guides. Direct replacement.
One-piece CNC-machined T-shape charge pipe with a mounting flange and multiple pre-drilled ports; large bore at both ends with bead-lock grooves.
Uprated charge cooler radiator for the BMW S55, with CNC aluminium end tanks — red or black anodised.
Uprated auxiliary radiators for the BMW S55 — supplied as a left and right pair, in black or red anodised finish.
Uprated oil cooler for the BMW S55 — all-aluminium welded core, using the factory mounting position.